How to connect ma Dot2 to control intensity level of Madrix.

brockburns94 · Post by **brockburns94** » Wed Dec 15, 2021 8:35 pm

Recently set up Madrix, my LED responded to it. Just need tips on how to use my dot2 console to control the intensity of the lights. Thanks.

Schulze · Post by **Schulze** » Thu Dec 16, 2021 5:00 pm

Hi brockburns94,

Welcome to the MADRIX Forum!

MADRIX 5 supports different possibilites for Remote Control, such as DMX-IN, Art-Net, sACN, MIDI, Remote HTTP.

Here you will find a list about all Remote Control options in MADRIX 5:
https://help.madrix.com/m5/html/madrix/ ... ntrol.html

Since you are using a Console, DMX-IN or Art-Net Remote should be most likely the way to go.

Here you can learn how control MADRIX 5 remotely using Art-Net or DMX-In Remote:
https://help.madrix.com/tutorials/m5/HT ... mx_in.html
https://help.madrix.com/tutorials/m5/HT ... t_net.html
https://youtu.be/A5LcxCqnOBs

I hope this helps you!

MADRIX Forum