MADRIX Forum

Hello davox,
.
When you want to connect a fixture with a 3 pin XLR male jack to the MADRIX NEO you will need a 5 pin XLR male to 3 pin XLR female adapter.
.
If you have any further questions, please do not hesitate to contact us again!
Thank you.

Hello cg, . The "Enttec - DMX USB Pro MK2" will work only with one DMX output port in MADRIX. This interface is not an official supported interface of MADRIX. Please have a look to the "MADRIX supported interfaces": http://help.madrix.com/m3/html/madrix/index.html?hidd_supported_...

Hello davox, Welcome to the MADRIX forum. . The MADRIX NEO is a DMX512 USB interface which sends the live DMX data from MADRIX to the plugged fixtures. That means when you have connected your desired DMX decoder to the NEO you also have to connect the NEO to a PC. On MADRIX must be installed and you...

Hello awpross, I am sorry to hear about this problem. . Occurs this issue always at the same cue and only randomly after different cycles of the cue list or occurs it always at random cues? . Can you please send us the created setup and a permanently saved logfile to info[at]madrix[dot]com. To save ...

Hello michilson, Welcome to the MADRIX forum. . In MADRIX it is possible to use a capture card as video input device and playback it on your desired LED matrix. Please choose the "SCE Capture" effect in MADRIX to use the desired capute device. Here you will find some more information about...

Hello mrpackethead,
.
In MADRIX 3 you can use the "Entec - USBDMX PRO MK2" only as DMX output interface.

Hello stuartm, . It is not very difficult to use the PLEXUS as Art-Net node for an other lighting desk than MADRIX. . You only have to assign the desired Art-Net universe to the desired DMX output port. Therefore go in the PLEXUS to "Network > Art-Net" and change the settings for "Art...

Hello nsunier, . Please try to receive the Artnet date in "Receive From All Addresses And Universes" mode in MADRIX and send in Art-Net 2 mode in the grandMA. Can you receive the data? Also please double check the network connection. Please make sure that the cable which is plugged in the ...

Hello jknight, Welcome to the MADRIX forum. . Currently you will not find moving heads without RGB color mixing in the MADRIX fixture library. MADRIX is designed to control RGB LED matrices. If you want to control a RGB moving head or washlight you can only control the colors with MADRIX, the moveme...

Hello tn_khoa, . Please make sure that MADRIX will alway start with the NVIDIA graphic card. In the following youtube link you will learn how you can setup this: https://www.youtube.com/watch?v=Zh4HCadTY_A#t=59 . You also said MADRIX crashes sometimes during the execution. Please send us the created...